Open Positions

Laconia, NH

STS Aerospace in Laconia, NH is searching for a Chemical Clean Operator to join the team.

This position is responsible for processing metal assemblies though the chemical cleaning process. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily and with reasonable accommodation when necessary.

Scope of Responsibilities

Performs a variety of cleaning processes involving water, solvents, and alkaline cleaning solutions.
Uses overhead crane to perform time sequential transfers of baskets to and from processing solutions.
Loads and unloads parts into process baths.
Dries parts using compressed air and ovens.
Application and removal of maskant on details when required.
Follows all required safety and OSHA rules and regulation including the use of PPE.
Performs visual inspection of parts and assemblies.
Verifies and maintains accuracy of routers and other applicable documents for completeness.
Consistently, regularly, and predictably at work and on time.
Other duties as assigned

Education, Certifications, Licenses & Registrations

High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Salary & Benefits

We offer a competitive compensation and benefits package, including:

401(k)
Medical, Dental & Vision insurance
Employee assistance program (EAP)
Flexible spending account (FSA)
Health savings account (HSA)
Paid time off
Tuition Reimbursement

Apply Now

STS Aerospace (previously known as Lewis & Saunders) in Laconia, NH is searching for a Diagnostic Technician to join the team.

This position is responsible for coordinating manufacturing processes in an industrial plant by performing the following duties: Responsible for working within the aftermarket engineering group. Will aid in the development of the repair processes, and ensure FAA, EASA, CAAC and customer compliances. Perform visual and dimensional checks on materials, assemblies, tube details, and components. Inspect and test components, parts, tube details, and assemblies to validate conformance to blue prints, engine manuals and instructions by customer, and to company operating procedures.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily and with reasonable accommodation when necessary.

Essential Duties & Responsibilities

Must be knowledgeable in the requirements of the various regulatory agencies with respect to repair and overhaul
Aids in evaluating and improving manufacturing methods as required.
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.
Applies statistical methods to estimate future manufacturing requirements and potential.
Performs janitorial and cleaning duties to maintain clean and orderly equipment and shop.
Have excellent typing and computer skills. Ability to stay on task.
Consistently, regularly and dependably at work and on time.

Education & Experience

Two year degree in related field or two to five years related experience and/or training; or equivalent combination of education and experience.

Certificates, Licenses, Registrations

Previous or current FAA repairman license preferred.

Benefits

401(k) matching
Medical, Dental, Vision
Flexible spending account (FSA)
Health insurance (HSA)
Employee assistance program (EAP)
Life insurance
Paid time off

STS Aerospace in Laconia, NH is searching for an Induction Braze Operator to join the team. This position is responsible for the set-up and operation of induction brazing equipment to customer specifications including assembly of details at various levels prior to brazing. Brazers are responsible for performing various calibration, measuring, and inspection functions. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities.

Essential Duties & Responsibilities

Continuously completes successful braze and debraze procedures in manufacturing cell
Makes and cuts braze rings.
Follows all applicable work instructions and documentation.
Assembles using resistance tack welders.
Fabricates and insulates braze coils and glass.
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk and hear.
The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
Specific vision abilities required by this job include close vision and color vision.
Consistently, regularly and predictably at work and on time
Other duties may be assigned as needed

High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Benefits

401(k)
Medical, Dental & Vision insurance
Employee assistance program (EAP)
Flexible spending account (FSA)
Health savings account (HSA)
Paid time off
Tuition Reimbursement

STS Aerospace in Laconia, NH is searching for a Logistics Supervisor to join the team.

This position is primarily responsible for supervising the warehouse staff to ensure materials are reaching the floor timely, accurately, and consistently as well as in a safe organized manner. This role will also serve as back-up to shipping as needed.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities.

Essential Duties and Responsibilities

Promote a safe work environment for all staff members
Oversee warehouse staff – maintain workforce through coaching, training, mentoring, performance reviews, and discipline as needed
Communicate shortages and anticipated problems with production planners
Accurately and timely enter daily receipts of goods and services in database
Expedite deliver of goods and services as needed
Participate in all meetings are required
Assist with physical inventory
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk and hear.
The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
Consistently, regularly, and predictably at work and on time
Other duties may be assigned as needed

Education, Certifications, Licenses, & Registrations

High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Benefits

401(k)
Medical, Dental & Vision insurance
Employee assistance program (EAP)
Flexible spending account (FSA)
Health savings account (HSA)
Paid time off
Tuition Reimbursement

STS Aerospace in Laconia, NH is searching for a Manufacturing Assembly (Second Shift) to join the team. This position involves the fabrication of metal tubing both rigid and flexible, for a multitude of operations, by cutting, grinding, forming, de-burring, cleaning, swaging, and polishing according to specifications, for use in hydraulic fuel, pneumatic, waste and exhaust installations.

Essential Duties and Responsibilities

Performs visual and dimensional checks on materials, assemblies, tube details, components and finished products.
Plans, lay out, fabricate, assembles, install, salvage parts from assemblies and repair rigid and/or flexible tube assemblies, fixtures, equipment, and products by performing the following duties.
Perform various functions by hand and utilizes hand tools to prepare hose for assembly including removing rubber to buff back ends for fittings, connect fittings to hose, apply RTV, and other assembly preparations.
Sets up and operates abrasive, squaring, deburring, and sizing equipment such as swager or crimper.
Reads and interprets blueprints, method sheets, process sheets, policies and procedures to manufacture a variety of rigid and flexible metal tubes.
The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
Consistently, regularly and predictably at work and on time·
Other duties may be assigned as needed

Education, Certifications, Licenses & Registrations

High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Salary & Benefits

We offer a competitive compensation and benefits package, including:

401(k) matching
Medical, Dental, Vision Insurance
Employee Assistance Program (EAP)
Flexible Spending Account (FSA)
Health Savings Account (HSA)
Life insurance
Paid time off

Apply Now

STS Aerospace in Laconia, NH is searching for a Manufacturing Assembly to join the team. This position involves the fabrication of metal tubing both rigid and flexible, for a multitude of operations, by cutting, grinding, forming, de-burring, cleaning, swaging, and polishing according to specifications, for use in hydraulic fuel, pneumatic, waste and exhaust installations.

Essential Duties and Responsibilities

Performs visual and dimensional checks on materials, assemblies, tube details, components and finished products.
Plans, lay out, fabricate, assembles, install, salvage parts from assemblies and repair rigid and/or flexible tube assemblies, fixtures, equipment, and products by performing the following duties.
Perform various functions by hand and utilizes hand tools to prepare hose for assembly including removing rubber to buff back ends for fittings, connect fittings to hose, apply RTV, and other assembly preparations.
Sets up and operates abrasive, squaring, deburring, and sizing equipment such as swager or crimper.
Reads and interprets blueprints, method sheets, process sheets, policies and procedures to manufacture a variety of rigid and flexible metal tubes.
Consistently, regularly and predictably at work and on time· Other duties may be assigned as needed

Education, Certifications, Licenses & Registrations

High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Salary & Benefits

We offer a competitive compensation and benefits package, including:

401(k) matching
Medical, Dental, Vision Insurance
Employee Assistance Program (EAP)
Flexible Spending Account (FSA)
Health Savings Account (HSA)
Life insurance
Paid time off

Apply Now

STS Aerospace in Laconia, NH is searching for a Material Planner to join the team.

Under the general direction of the Purchasing Manager, this position is responsible the flow of goods and services to assure on time delivery and customer satisfaction. Internally schedules and coordinated material release and flow between departments. Material Planners are responsible for products from supplier to stock room. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities.

Essential Duties and Responsibilities

Input and maintain material delivery schedules
Review SCM schedules with suppliers
Update supplier comments as needed
Verify delivery schedules meet MPS
Suggest MPS revisions if materials cannot meet MSP demand
Communicate shortages and anticipated problems with production planners
Accurately and timely enter daily receipts of goods and services in database
Expedite deliver of goods and services as needed
Participate in all meetings are required
Assist with physical inventory
Conduct on-site vendor visits
Assist with quality corrective actions and supplier related issues
Liaison between suppliers, purchasing, finance, production, and quality
Manage and report metrics
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk and hear.
The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
Specific vision abilities required by this job include close vision and ability to adjust focus.
Consistently, regularly, and predictably at work and on time
Other duties may be assigned as needed

Education & Experience

High School Diploma or Equivalent; one to two years related experience and/or training; or equivalent combination of education and experience.

Benefits

401(k)
Medical, Dental & Vision insurance
Employee assistance program (EAP)
Flexible spending account (FSA)
Health savings account (HSA)
Paid time off
Tuition Reimbursement

STS Aerospace in Laconia, NH is searching for a Pressure Test Operator to join the team.

This position is responsible for testing manufactured pieces based on specific PSI and time limits as outlined by our customers to ensure quality standards.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily and with reasonable accommodation when necessary.

Essential Duties and Responsibilities

Performs visual and dimensional checks on materials, assemblies, tube details, components and finished products.
Inspect and test components, parts, tube details, and assemblies to validate conformance to blue prints and instructions by customer and to company operating
Determines appropriate fittings (feeds and caps) to perform the test
Lifts, positions, connects, disconnects, and removes work pieces from pressure test tank
Performs testing based on specific PSI and time limits as outlined by our customers to ensure quality standards
Utilize tank interlocks and all safety mechanisms
Observe test, inspect for bubble formation, seepage, or water droplets
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk and hear.
The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
Consistently, regularly and predictably at work and on time
Other duties may be assigned as needed

Education, Certifications, Licenses, & Registrations
High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Benefits

401(k) matching
Medical, Dental & Vision insurance
Employee assistance program (EAP)
Flexible spending account (FSA)
Health savings account (HSA)
Life insurance
Paid time off

STS Aerospace in Laconia, NH is searching for a Quality Inspector to join the team.

This position involves performing visual and dimensional checks on materials, assemblies, tube details, components and finished goods to validate conformance to blueprints and instructions by customers, and to company operating procedures.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily and with reasonable accommodation when necessary.

Essential Duties & Responsibilities

Measures angular dimensions, radii, contours, clearances, threads, wall thickness, and other characteristics as stipulated on the inspection plan
Tests units for fit of moving parts (i.e nuts and sleeves)
Verifies gauges and measuring instruments for conformance to calibration intervals
Understands engineering drawings and confers with management or engineering staff to determine quality requirements
Inspects product at specified stages in production process, and tests products for variety of qualities such as dimensions, mechanical, electrical, or coatings (visual)
Identifies and reports changes to existing quality or production procedures to achieve optimum quality
Validates conformance or identifies non-conformances and reports findings to engineering and management
Consistently, regularly and predictably at work and on time
Other duties may be assigned as needed

Education & Experience

High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Benefits

401(k)
Medical, Dental, Vision insurance
Employee assistance program (EAP)
Flexible spending account (FSA)
Health savings account (HSA)
Life insurance
Paid time off

STS Aerospace in Laconia, NH is searching for a Shipper to join our team.

Under the general direction of the Shipping Supervisor, this position is responsible for the timely packing and shipping of manufactured pieces.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities.

Essential Duties & Responsibilities

Packages assemblies and inspect wrapping, parts, and containers for conformance to company standards, customer requirements, shipping companies, and postal regulations
Weighs packages and determines postage and affixes postage stamps to packages
Prepares product and packages for shipping in conformity with company, customer, and government regulations, both domestic and internationally
Able to navigate and accurately enter data into various shipping websites for the generation of shipping labels for domestic and international shipments
Able to navigate customer websites to provide up to date shipping data
Verify and document all incoming material
Must be able to stand/walk 8 hours per day
Able to regularly lift 10lbs and occasionally up to 25lbs
Other duties as assigned.

Education, Certifications, Licenses, & Registrations

High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Benefits

401k Matching
Medical, Dental & Vision Insurance
Employee assistance program (EAP)
Flexible spending account (FSA)
Health savings account (HSA)
Life insurance
Paid time off

STS Aerospace in Laconia, NH is searching for a Warehouse-Kitter to join the team.

This position is responsible for retrieving materials to create assembly kits for the manufacturing floor as well as retrieving other materials, as needed, which are necessary for the manufacturing process.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities.

Essential Duties & Responsibilities

Gathers product components for assembly based on pick list and work orders
Counts parts to determine inventory accuracy
Maintains accurate inventory database
Prints and attaches labels to accurately identify parts
Identify and communicate discrepancies to supervisor
Conveys materials from storage or work sites to designated area
Counts, weighs, and records number of units of materials moved or handled on daily production sheet
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk and hear
The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds
Able to stand/walk 8 hours per day
Specific vision abilities required by this job include close vision and ability to adjust focus
Consistently, regularly and predictably at work and on time
Other duties may be assigned as needed

Education & Experience

High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience.

Benefits

401(k) matching
Medical, Dental , Vision Insurance
Employee Assistance Program (EAP)
Flexible Spending Account (FSA)
Health Savings Account (HSA)
Life insurance
Paid time off

Apply Now!

To apply for one of our open positions, click the button below and email us your resume. Please include the position in the subject line. We look forward to meeting you!

Email Resume

View our Applicant Privacy Statements.

Employee Spotlight

Environmental Test Lab Team

Our Environmental Test Lab team has contributed monumentally to our success the Flex and Metal hose market. Without the dedication and commitment of these individuals, we would not be who we are in the aerospace industry. The lab team consists of Mark Rennie, Longin Muza, and Jay Gilson along with the Engineering, R&D, and Production teams as their main support systems. Most recently, the team has gone above and beyond processing and completing critical testing, providing conformance to qualified product. Not only does this team consistently meet scheduled requirements, they can sprint at a moment’s notice to satisfy additional requests. This often requires weekends and off-shifts, disrupts schedules and requires personal sacrifices. This can-do team rises to the occasion time and time again with no complaints. The next time you see any of these individuals, give them a thank-you—for they maintain our top-performing status.

Manjunath “Manju” B

Titeflex India

Manju joined Titeflex at the young age of 19 as a production fitter on the shop floor, where he learned the ropes methodically and became a perfectionist of his craft. His broad thinking and curiosity was noticed amidst his production skills, and he was promoted to the Planning department. Since his promotion, Manju has implemented significant improvements, resulting in time and money savings, earning him the Flex-tek Excellence Award for Production Excellence.

During this time, Manju also learned how to turn his excellent communication skills into a new venture, as he won the Inter Divisional Public Speaking Contest for Flex-tek and Smiths. During his free time, Manju enjoys spending time with his wife Arpitha and son Pragnay, and playing volleyball, cricket, and relaxing.

Brock Yahn

Brock has been with STS Aerospace since 2005. He has held many positions within the company including Fabrication Mechanic, Lead, Supervisor, Manufacturing Engineer and Operations Manager. He has been working on the development of the leadership group and is excited to share the accomplishments. “I feel that we truly believe in personal development and relationship building of team members in addition to meeting business objectives.”

Diane Dello Russo

Titeflex Aerospace - Laconia, NH

Join us in celebrating 21 years of service for Diane Dello Russo. She is an experienced Production Planner with exceptional teaming skills. She works closely with operators, master planning and leadership to align resources according to the operational needs. She is always proactively 10 steps ahead to resolve potential obstacles before they impact production. Her care and commitment are keys to the smooth flow of our flex production operation.

Diane, we are proud of who you are, all you do and the impact you have at STS.

Lena Poulin

Titeflex Aerospace - Laconia, NH

Join us in celebrating 34 years of service for Lena Poulin. She is an expert Induction Brazer with exceptional team leadership skills and cross trained to support several processes. She works closely with engineering and leadership to handle some of the most difficult braze set ups and processes, always approaching it with a keen eye for safety. Her commitment and dedication is top notch.

When she’s not driving success at STS she enjoys fishing, especially on The Great Lakes.

Lena, we are proud of who you are, what you do and the difference you make at STS.

Ashley Clements

Ashley Clements has been with STS Aerospace since March 2020. She started her journey as a Final Inspector, then moved into the DSQR role. She is now a Quality Engineer! “My new position was a goal of mine when I started working here. I always like to ask why, and not accept something for what it is and that’s helped me learn and understand my job better.”

Jennifer Rasse

Titeflex Europe

Jennifer grew up with a desire to work with her hands in the automotive industry. She would often work with friends on their car repairs in her free time and became a hairdresser—a career path selected because her parents told her welding and machining was not a field for girls.

Fast forward some years, and Jennifer decided to go back to her dream and started working at Titeflex Europe. She showed interest and promise, and we sponsored her schooling, where teachers reported her exceptionally talented. Turned out, Jennifer passed her certificate training in record time, twice—a never-seen-before feat at The Welding Institute.

During Covid lockdown, instead of picking up a new skill, Jennifer asked to go for more welding qualifications, and she proved again to be a star performer. She has been nominated by instructors to go for an engineer level welding certificate, and studying machining when not doing that or working. Jennifer shows tenacity and perseverance like no other, and we are proud to have her as part of our team.

Our Company Culture

Performance is defined by how we behave and the results we achieve that positively impact our people, our planet and our profit. Respect is both given and received—we will strive to listen to each other’s opinions, while behaving with patience and compassion. Our agility stems from the empowerment of our people to develop resourceful solutions that are simple and innovative. Have passion for what you do, strive to be your best and foster enthusiasm with a never-yielding positive attitude. We achieve alignment by creating a trusting environment where open discussions, productive conflict and collaboration leads to a common goal. Values are the foundation of our culture, and it’s our culture that makes us unstoppable. Live these values customers will be pleased, business will prosper, employees will benefit, and the community will thrive.